Most greasing jobs go wrong at the coupler, not in the gun. This lever-action gun gives you a proper four-jaw hydraulic coupler, a flexible 300 mm hose that curves around brake backing plates and suspension arms, and enough pressure to push old grease out of a joint that has been dry for a season.
Features
- 6,000 psi (41 MPa) working pressure — clears blocked and neglected nipples
- Three loading methods — 400 g cartridge, bulk fill, or suction fill straight from a drum
- 300 mm flexible hose with a four-jaw hydraulic coupler that grips angled nipples properly
- Cast aluminium head with bleed valve for fast priming after a reload
- Knurled barrel unscrews by hand — no tools needed to swap a cartridge
- Lever plus pistol grip gives you steady pressure and control with one hand
- Powder-coated steel barrel resists workshop knocks and oil
Specifications
- Working pressure: 6,000 psi / 41 MPa
- Burst pressure: 10,000 psi / 69 MPa
- Capacity: 400 g cartridge / 500 cm³ bulk
- Hose: 300 mm flexible, 1/8 in. BSP thread
- Coupler: four-jaw hydraulic
- Barrel: steel, powder-coated
- Weight: 1.3 kg (empty)
Good to know
Grease is not included. Suits standard NLGI 2 and NLGI 3 grades in 400 g cartridges. After loading, open the bleed valve and pump a few strokes until grease flows steadily before connecting to a nipple.
Safety: never point the coupler at yourself or anyone else — grease injected under the skin is a medical emergency. Wipe the nipple clean before fitting the coupler so grit does not get pushed into the bearing.
Reviews
There are no reviews yet.